Skip to main content

Guides

Product Inspection Checklist: What to Ask Your Warehouse to Check

A practical checklist for inbound inventory: what a warehouse should count, look at and photograph, how to handle defects, and when a spot check is enough versus checking every unit.

7 min readBy the Treasure World Prep Center team

Key takeaways

  • Write the checklist before the freight ships. A warehouse can only check what you told it to check.
  • Cover seven things: counts, outer packaging, labels and barcodes, cosmetic defects, function (where it's safe), lot and expiry info, and photos.
  • Decide ahead of time what happens to a bad unit: hold it, set it aside, or report it and wait for your call.
  • Spot checks are fine for repeat, low-risk SKUs. New suppliers, fragile goods and dated products usually earn a full check.

Why you need a product inspection checklist before anything ships

Here's the thing about inspection. A warehouse team will look at what you ask them to look at. If your instructions say "check the goods," you'll get a quick look and a count. If you hand over a real product inspection checklist, you get answers to the questions you actually care about.

We receive inventory every day at our warehouse in Niles, Illinois. The sellers who have the fewest surprises aren't the ones with the best suppliers. They're the ones who wrote down, in plain words, what "good" looks like for each SKU.

So this post is a working list. Copy it, cut what doesn't apply, add what's specific to your product, and send it with your work order. If you're new to sending stock to a third-party warehouse at all, read how to send inventory to a prep center first, then come back.

The checklist

Not every line applies to every product. Phone cases don't need an expiry check. Vitamins do.

  • Counts: cartons received vs. the packing list, then units per carton (spot count or exact each-count, your choice).
  • Outer packaging: crushed corners, wet or stained cartons, re-taped boxes, broken pallets, anything that looks opened.
  • Retail packaging: dents, tears, scuffed print, broken seals, missing shrink wrap or blister damage.
  • Labels and barcodes: correct SKU on the label, barcode scans, only one scannable code showing where that matters, label not wrinkled over a curve.
  • Product match: right color, size, model and variation. Same item as your sample photo, not a lookalike.
  • Cosmetic defects: scratches, chips, stains, loose threads, misprints, uneven finish. Say what counts as a pass.
  • Function checks (only where feasible and safe): does it turn on, zip, snap, close, pour? You supply the test steps.
  • Lot, batch and expiry: record the code or date, flag anything short-dated against your cutoff.
  • Inserts and accessories: manuals, chargers, spare parts, cards. Present or missing.
  • Photos: which issues get photographed, and how many shots per issue.
  • Disposition: what to do with failed units (hold, set aside, or report and wait).

That last line is the one people skip. More on it below.

Counts and packaging: the inbound inspection basics

Every check starts with the boring stuff. How many cartons showed up? Does that match the packing list or ASN? Are any boxes obviously damaged?

Carton counts are fast. Unit counts take longer, and they're where most discrepancies hide. A supplier promises 48 per case and packs 46 in a few of them. You won't know unless someone opens the case and counts. Our inbound receiving and inventory control work covers both: a basic count-in by carton, or an exact each-count when you ask for it.

Packaging condition gets checked at two levels. The shipping carton (was it crushed, wet, re-taped?) and the retail package inside (is the box sellable, or does it look like a return?). A dented shipper is a note. A torn retail box is a defect.

Labels, barcodes and product match

Wrong labels cause more headaches than broken products. A unit with the wrong barcode can get counted as a different item.

On your checklist, ask the team to scan a sample of barcodes from each SKU and confirm they match what you expect. If the product is going to Amazon, check the current labeling rules in Seller Central, since we can't promise what any marketplace will accept. Our post on Amazon FBA prep requirements covers the general idea.

Then product match. Is the blue one actually blue? Is the 12 oz bottle really 12 oz? Suppliers swap variations more than you'd think. A sample photo attached to your instructions makes this check fast and objective.

Cosmetic defects and function checks

This is the part of a quality control inspection where vague instructions fall apart. "Check for defects" means something different to every person holding the product.

Write a short defect checklist per SKU. Something like:

Fail
Crack, chip, missing part, broken seal, stain on the product itself
Note but pass
Light scuff on the shipping carton, small crease on the retail box
Ask us first
Anything you're not sure about. Photograph it, hold it, wait for a reply

Function checks are possible for some items, but they need guardrails. We'll only test something if there's a safe, written procedure from you, and if the test doesn't damage sellable packaging. Opening a sealed retail box to test a gadget may turn a new unit into an open-box unit. Decide if that's worth it.

Lot numbers and expiry dates

For food-adjacent products, cosmetics, supplements and anything dated, ask for lot or expiry capture. The team records the code or date per unit, and you set the cutoff ("flag anything expiring before X"). Platforms have their own date rules, so check the current help pages for whichever channel you sell on.

What happens to defects: hold, set aside or report

A good product inspection checklist ends with a decision tree. Otherwise, the warehouse finds 20 damaged units and has to stop and ask you anyway.

  1. 01

    Hold

    The unit stays out of any outbound shipment until you decide. Good default when you're unsure.

  2. 02

    Set aside

    Bad units go to a separate, labeled area so they can't get mixed back into sellable stock. Use this when you already know they won't ship.

  3. 03

    Report

    You get a count, SKU breakdown and photos so you can file a supplier claim or approve next steps.

After that, the options are usually return to vendor, repackage, refurbish or dispose. Those jobs overlap with returns, removals and refurbishment, and they're priced separately from the inspection itself.

One tip: ask for photos before anything is thrown away. Your supplier will want proof.

Spot check or 100% inspection?

Short answer: it depends on risk, not on how much you trust the warehouse.

A spot check (opening a sample of cartons per SKU) makes sense for repeat orders from a supplier with a clean history, simple products that rarely break, and stock that's getting relabeled anyway. You catch systemic problems (wrong variation, wrong count per case) without paying to look at every unit.

A 100% check makes sense for a first order from a new supplier, fragile or high-value items, anything with expiry dates, and products where one bad unit means a bad review. It also helps when a spot check finds problems. If 3 of 10 sampled units fail, stop sampling and check everything.

Many sellers do both: full check on the first shipment, spot checks after that.

What inspection costs at one Chicago-area warehouse

We can't tell you what the industry charges. We can tell you what we post. These are Treasure World's own rates for product inspection services in Chicago and related receiving work:

Basic visual QC
$0.25/unit
Detailed inspection / grading
$0.75-$1.50/unit
Carton receiving
$1.00/carton
Unit count / carton verification
$5/carton + $0.10/unit
Lot / batch / expiry capture
$0.20/unit
Evidence photos
First 3 free, then $1/photo

Here's a hypothetical. Say you send 400 units of a dated product in 10 cartons, going into storage (not straight to a marketplace). You want a basic visual check on every unit, expiry dates recorded, and photos of anything bad. The team ends up taking 8 photos.

  • Carton receiving: 10 x $1.00 = $10
  • Basic visual QC: 400 x $0.25 = $100
  • Expiry capture: 400 x $0.20 = $80
  • Photos: 8 taken, 3 free, 5 x $1 = $5
  • Total: $195, before storage and any work on the defective units

Swap the basic check for detailed grading on all 400 units and that line becomes $300 to $600. Inspection work that doesn't fit a per-unit rate is billed at standard labor, $40 an hour. If the stock is headed to Amazon, our Amazon FBA prep rates already include receiving and basic inspection, starting at $0.70 a unit for wholesale and private label.

Send the checklist with the work order

Put it in writing before the inventory leaves your supplier. Name the SKUs, attach sample photos, say spot check or full check, and spell out the defect rules. Then the team isn't guessing, and you aren't either.

Want us to look at a checklist and price it? Request a quote with your SKU list and volumes, and we'll confirm what applies.

FAQ

Common questions

Start a conversation

Want the warehouse to handle this for you?

Send your products, volume and channels. The team in Niles will scope the work and send a quote.